Ningbo Oturn Machinery Co.,Ltd

www.oturncnc.com Specification: Item unit VMC 1060 X/Y/Z-axis travel mm 1 020 /610/610 Distance from guide plane to spindle center mm 125-735 Distance from column surface to spindle center mm 700 spindle speed rpm 8000 (belt-type) tapper spindle nose No. 4 0 tools specifications BT- 4 0 tools magazine form Knife arm type number of tools magazine pcs 24 pull nail form MAS-P40T-1 （ 45°) maximum tools diameter/adjoining no tool Mm 80/150 maximum tools length Mm 300 maximum tools weight Kg 7 spindle motor (continual/30min) kw 7.5/11 X/Y/Z-axis motor kw 3.0/3.0/3.0 worktable worktable area mm 1 2 00×600 worktable maximum load kg 9 00 T slot(slot*width*center distance) mm 5×18× 100 Distance   from ground to worktable mm 860 X-axis rapid movement m/min 36 Y -axis rapid movement m/min 36 Z -axis rapid movement ...

www.oturncnc.com Main features and description 1. High quality castings: machine main pieces: base, saddle, table, column, the headstock are made of high quality resin sand molding, high strength and high quality cast iron, with heat treatment process improvement to eliminate the residual stress, and the layout of sufficient reinforcement plate to ensure that the whole machine has enough strength and rigidity ,high stability; 2.Super wide base: one casting, four layers of honeycomb mesh structure, provide the most stable load support capability, coupled with the water guiding plate design, cutting fluid leakage 3. Herringbone column: widening with span, improve the rigidity of the machine. The shoulder loading type ATC bracket, can enhance the rigidity of the column, and can also ensure that after the installation of the ATC, the column precision. 4. Rib type die design: internal ribs bold increase, strengthen the structure rigidity, and the golden ratio structure of ...