CNC Milling and Drilling Machine for Metal




Features:

1.Gantry structure and three-axis(or four-axis) linkage, table moving，stably running and high-precision positioning.
2. Whole heat treated, after the removal of internal stress the machine own good rigidity, durability and hardly deformation.
3. Grinding T-slot worktable.
4. Adopt Siemens control  system, support different languages. With preview and review function, the metal working center can achieve working without dead zone processing.
5. High precision and high speed spindle, steeples speed control.
6. Main parts all adopt high-quality products from well-known manufacturers, Hiwin or TBI rail, Denamu spindle, Omron, Kawaichi, etc.

Specification:

Model
OT6060 /1010
Table moving type
Working Size
Length x Width ×height(mm)
600x600×250
Vertical Drilling Head
Quantity
1

Spindle Taper
BT30

MAX Spindle Speed (r/min)
3000/24000

Spindle Motor Power (kw)
5.5/7.5
Gantry Longitudinal Movement 
(X-axis)
Max. Stroke (mm)
600

Moving Speed (m / min)
0-8

Drive mode
Guided by linear rolling guide; driven by servo motor and ball screw pairs.
Power Head Lateral Movement (Y Axis)
Max. Stroke (mm)
600

Moving Speed (m/min)
0-8

Drive mode
Guided by linear rolling guide; driven by servo motor and ball screw pairs.
Vertical Ram Feed Movement (Z-axis)
Max. Stroke (mm)
220

Moving Speed (m/min)
0-4
Positioning Accuracy(X/Y/Z)
±0.05/300 mm
Repeat Positioning Accuracy(X/Y/Z)
±0.03/300 mm

评论

发表评论

此博客中的热门博文

CNC Drilling Machine for Tube and Sheet

图片
www.oturncnc.com Feat ures: (1) Y-axis: beam along the both sides of the bed, guide horizontal motion. X-axis Transmission system adopts ac servomotor, after the gear reducer reduce speed, drive the gear rotation. It can realize the X-axis linear movement accurately. The x-axis is double drives. (2) Y-axis: milling heads slide over beam, the guide rail horizontal motion. Y-axis Transmission system adopts ac servomotor, after the gear reducer reduce speed, drive the gear rotation, It can realize the Y-axis linear movement accurately (3) Z-axis: milling ram over slide, the guide rail moves up and down. Z-axis Transmission system adopts ac servomotor, after the gear reducer reduce speed, drive the gear rotation. It can realize the Z-axis linear movement accurately. Specification: Model OT 1515 Working Size Length x Width (mm) 1500mm*1500mm Vertical Drilling Head Quantity 1 Spindle Taper BT40 Drilling Diameter (mm) Tapping ...
阅读全文

CNC Flange Drilling Machine

图片
www.oturncnc.com Feat ures: 1. CNC slide way drilling spindle (Z axis) with work piece of stroke is pre-set, realized auto switch. The CNC drill and milling machine drill not only through-hole, but also blind-hole with high efficiency, simple-structure, low-cost maintenance, easy operation etc. 2. The CNC drill and milling machine has 12 hydraulic clamps & T slots for fixing workpieces, easy to operate, also save time, improve production efficiency. 3.The CNC drill and milling machine machine have three CNC axis: gantry moving direction (x-axis); drilling head moving direction (y-axis); Spindle feeding direction (z axis). The CNC drill and milling machine equip each axis with linear guide and ball screw which driven by high precision servo motor. 4. The CNC drill and milling machine have scrap cleaner which collect iron scraps and cutting liquid. 5. The CNC drill and milling machine equipped with automatic lubrication system for linear guides and ball s...
阅读全文